How to Measure for Twist Fit Roller Blinds
Twist fit roller blinds are a fantastic no-drill solution, and our easy measuring guide ensures you get a perfect fit every time. Follow the simple steps for precise measurements and enjoy effortless installation with these sleek, stylish blinds.
Inside Recess
Twist Fit Roller blinds are only suitable for inside the recess fit
For mounting the blind inside your window recess follow these instructions.
Step 1
Measure the Width
Measure the width of your window recess in three places (top, middle and bottom). Use the smallest measurement as your width.
Step 2
Measure the Drop
Measure the drop of your window recess in 3 places (top, middle and bottom). Use the smallest measurement as your drop.
Step 3
Enter your Measurements
Go to your chosen product on our site, enter your width and drop measurements and follow the remaining steps to customise your twist fit roller blind.
Deductions
We will make a small deduction to the width of your blind when you select Inside Recess to accommodate the brackets. But note that the fabric will be 35mm narrower than the size given due to the chain control and brackets.
Important Notes
Width Obstruction Check
If you have any obstruction within your recess such as tiles, measure between these two points and use this as your width measurement. If the difference between this measurement and the top of your recess is less than 25mm you can use the measurement at the top of your recess.
Check your Recess Depth
nsure you have at least 5cm clearance between the edge of any obstruction and the front of your window recess.