How to Install Twist Fit Roller Blinds
Installing your new twist fit roller blind is quick and easy with our how to guide. Grab your tools and follow the instructions below. If you need any assistance along the way please give us a call or start a live chat with our highly trained customer support team. You will need to provide your own screws as the type required varies greatly depending upon the surfaces you are fixing to. You will need 4mm diameter screws, suitable for the material you are installing into.
Fitting Instructions
Step 1
Angle the blind and insert it into the recess, then push the tightener against the wall
Step 2
Raise the control end of the blind to achieve a level position and release the pressure. The blind will hold itself in place.
TOP TIP: Ensure the blind is straight and level before securing it in place by making any necessary adjustments to its position.
Step 3
Secure the blind firmly and rotate the tightening wheel to ensure a tight fit. If the tightener is positioned on the left side, turn it towards you; if it’s on the right, turn it away from you.
TOP TIP: Ensure the wheel is tightened to its maximum extent to maintain the blind’s security and prevent slippage. If you encounter the ‘foot’ of the mechanism spinning while tightening, remove the blind from the window, tighten it slightly, reinsert it, and attempt the process again.
Child Safety
Our twist fit roller blinds are designed to be child safe with an easy break chain connector to prevent choking and strangulation for kids.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of reach of young children. Cords may become wrapped around a child’s neck. Move beds, cots and furniture away from window covering cords. Do not tie cord together. Make sure cords do not twist and create a loop.