Glimpse Noir Electric Roller Blind

Recess

For blind fitting within window recess

Measure in three places, across the top, middle and the bottom, this allows for any variances (such as part tiled walls).

Use the smallest of these measurements - We will make a small deduction to ensure that the blind fits perfectly within the recess, allowing for the blind fixtures and fittings.

Exact Width

Sometimes referred to as Bracket to Bracket Width

If installing outside of a window recess, measure the recess in three places, across the top, middle and the bottom, this allows for any variances. Then add a minimum of 10cm to the widest measurement for the overlap. This will give you your exact overall blind width.

If you have a wooden baton above the recess, we advise you to measure this as your exact width.
 

For blind fitting within window recess

Measure the recess drop (length/height) in three places, from top to bottom across the left, middle and right side of the internal window opening, this allows for any variances.

Use the smallest of these measurements - A small deduction will be taken to ensure the blind can operate correctly.

Exact Size

Sometimes referred to as Bracket to Bracket Width

If your blind does not sit within a recess or you simply want us to make a blind to your sizes with no deductions, measure the overall drop you require from top to bottom, including the blind headrail and any overlap to ensure you get full coverage. Then add a minimum overlap of 10cm to the top and bottom. This will give you your exact overall blind width.

If you have a wooden baton above the recess, we advise you to measure from the top of the baton to where you want the blind to finish as your exact drop.
​