Neat fit blinds are suitable to use on all windows that feature a flexible (rubber/foam) gasket seal between the glass and frame. These will typically be aluminium or Upvc framed windows. If in doubt, please call our friendly service team on 0370 218 7042.
To ensure the best possible fit, always measure your window bead to bead. This is from the inner edge of the frame, and not the edge of the seal/gasket. The blind projects a minimum of 30mm from the glass to the front of the folded operating handle.
Measuring The Width
Take two measurements of the width, at the top and the bottom of the window. If there is any variation always use the shortest
width to order your blinds. If the windows are particularly large you can take intermediate measurements to check. A small deduction of 2mm is taken from the width to ensure a perfect fit.
Measuring The Drop
Take three measurements of the window drop. If there are any variations, then always use the longest
You must measure accurately and to the nearest millimetre to ensure a good fit.